Medical grade humidifer bottle for PSA oxygen concentrator
We choose SALTER LAB. humidifier bottle (Model:REF-7600) latest product,have got FDA and CE certificate,its pressure release up to 6PSI(0.041MPa),regular humidifier pressure release is 3PSI,oxygen stability and anti-jamming capability is stronger,which will made patient feel more comfortable when inhale oxygen, and it can support to connect with home ventilator to use, since the pressure is enough.
Function of humidifier of oxygen concentrator
1. To humidify the gas
Most of the oxygen coming out of the oxygen generator is dry, and this dry oxygen can irritate the nasal mucosa and bronchial mucosa and cause discomfort. Therefore, when inhaling oxygen, humidify the oxygen first to avoid damage to the respiratory tract caused by dry oxygen.
2. Observe the oxygen flow rate through bubbles
During oxygen inhalation, the humidification cup allows users to observe the dynamic flow of oxygen produced by the oxygen concentrator in a true and intuitive manner, which is convenient for adjustment and detection.
Features:
* 360 degrees molded, low resistance, high output diffuser head design
* Audible 6psi pop off alarm
* Jar permanently etched with large print minimum and maximum water levels
This disposable humidifier has a 6psi pop off audible safety alarm, large easy to grip quad style wind nut, easy flow dome lid
design combined with a unique 360 degrees diffuser that helps to reduce rain-out. Easy jar to lid assembly with half turn positive
seal with no gasket required, permanent maximum and minimum water level indicators will not wash, wear or rub off.
How much water should be added to the humidifier bottle?
Regarding the amount of water, the water only needs to be between the maximum scale and the minimum scale. If there is too little water, the oxygen may not be fully humidified; if there is too much water, some oxygen generators will be turned on for a long time, and the body will heat up. If the body temperature is too high, the water will flow back into the interior and damage the machine! So how much water to add, operate according to the water level according to the scale requirements!Usage: The bubble humidifier is indicated for use with oxygen concentrator or gas sources in homecare, hospital, extended care facilities and hospice enviconment, Don't use on more than one person.
What kind of water is added to the humidifier bottle?
Distilled water or purified water should be added to the humidifier bottle of the oxygen concentrator. Remember not to add tap water directly. Because distilled water and purified water are processed, there are fewer impurities and cleanliness can be guaranteed. The tap water contains a lot of impurities, and long-term use will cause problems such as blockage of the nasal oxygen tube, failure of the oxygen generator to exhaust gas, and respiratory damage to users. In addition, the water in the humidifier bottle should be replaced every day. Make sure that the lid of the bottle is tightened before inhaling oxygen.
How to clean the humidifier bottle?
The humidifier bottle itself is easy to contain dirt and dirt, so it should be disinfected and cleaned regularly. Remove the humidifier bottle from the oxygen concentrator, clean it with a neutral detergent and rinse it with clean water; mix white vinegar with hot water in a ratio of 1:3, put the humidification cup in the mixture and soak for 30 minutes for disinfection. Then rinse the humidifier bottle thoroughly with warm water, and dry it for later use.
Longfian Scitech Co., Ltd was established in year 2005, located in Baoding City, Hebei province, China. We are a professional manufacturer, specialized in the development, production and export of medical serial oxygen concentrators 1-120LPM with CE and ISO certificate, which have been widely applied in home care, hospital, clinics, beauty salon, sports, industry and high altitude area etc. In the meantime, some oxygen related products, such as ozone, oxygen cocktail device, are developed also upon the demands of the market. Our products has been exported to Unite States, France, Spain, Germany, Russia, India, Singapore, Turkey, Thailand etc. More than 160 countries, enjoy a high reputation in interational market.
Our goal is professional in quality, focus on various oxygen concentrator&oxygen related products, and continue to bring you not only reliable, quality products, but also bring you a better life!
FAQ
Q: Are you a factory or trading company?
A:We are a Professional Manufacturer for oxygen concentrator from1-60lpm and oxygen related products.
Welcome to our company, seeing is believing, our company, show room and factory in same place.
Q. Where is your factory located? How can I visit there?
A: our factory is located at Power valley pioneer park, NO.369 Huiyang street , 071051,Baoding, Hebei,China, near to Beijing. Welcome to our company.
Q. What is your trading term?
A: 1. Payment term: T/T, or L/C , or Western Union for small amount .
2. Lead time: normally in 7-10 days after deposit received.
3. Sample policy: Samples are always available for each model. Samples can be ready in 3-5 days once payment received.
4. Shipping port: Tianjin/XinGang, China
5. Discounts: We offer discount for big quantity.
Q: How to purchase your product?
A:Quotation → PI → Confirm PI → Arrange payment →Producing →QC inspect → Shipping
Q: Can you provide the OEM service?
A: Yes, OEM is avaliable.
Q: How to ship the order?
A: Please inform us your instruction, by sea, by air or by express, any way is ok for us. We have very professional forwarder to provide the best shipping cost, service and guarantee.
Audited Supplier 
){kind=link}
){kind=link}